LOL
Thanks for the story Bob.

That makes it much more clear.

FWIW I have bulk once shot brass from armorally.com and most of them actually drop into the
case gauge and only a few don\’t drop in easily.

I then took my G26 barrel and tested a few and most of them dropped right on it. (this is unsized brass)

Thanks for the idea of sizing on a single stage or alternatively running only the bad the finished rounds trough the bulge buster.

One other idea I have heard is to make sure they you crank the 9mm sizing die down as tight as you can to the shell plate.
I am running 223 right now but will check that also.

I think you are right. Most of my rounds even if the case gauge doesn\’t like a few, I think that the G26 chamber will take almost anything. At least I know what I am looking for.

God Bless from the Missouri Ozarks