.243 Win Winchester Cartridge Brass Primed Cases #2 *PULLED*

#2 brass is meant for the more experienced reloader.

These primed cases have never been fired and come from demilled ammunition. They are essentially brand new but may have occasional minor dings or dents from the pulling process, including some mouth bulging that should size out when loaded. This is actually very typical for some pulled rifle brass and we consider the bulges to be minor. For most people the bulges size out when loaded. If there is any residual divot it should be very small and should not affect the performance nor the accuracy of the bullet. These cases have the normal pulled case spotting but, once loaded, they will shine up nicely in your vibratory tumbler. The primers are not crimped.

Like with all new brass, it is recommended that you resize the neck before loading to ensure that you have consistent neck tension. This is especially true with pulled brass as sometimes the case mouth can get dinged a little and it may be hard to seat a bullet without sizing. This can be accomplished easily by removing the decapping pin from your resizing die.

The #2 designation means that these cases will have more dents or dings than standard cases. It’s also possible you will get some with case mouths that are chipped or smashed and unusable.   In most cases you can pop out the primers and use them if you can’t use the cases.  It is always wise to inspect your cases before loading them.

NOTE: These must ship UPS ground. The price includes shipping within the lower 48 states. If you are outside of the lower 48 please contact us for additional shipping rates