UPDATE:
Jacob Wilcox called and solved the problem.
I did not realize how little I knew……
He suggested a few causes:
Limp wristing the gun.
A stiff slide spring
A funky magazine
Too light of a load.
He made me aware of the Ramshot load data at:
https://ramshot.com/load-data/
I set the OAL to the same as a working hollow point . i.e. the Winchester Ranger cartridge.
with an OAL of 1.120\”
I upped the load to 5.5 gn of silhouette. ( I think about 6gn is max and a +P load).
Anyhow I was elated to cycle 10 rounds through the G26 with zero issues!!!
Thanks Jacob
You now have a customer for life.