115 JHP n Titegroup

By /

RMR Bullets Home › Forum › Reloading Database › 115 JHP n Titegroup

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 5, 2022 at 8:10 am #407433
    Rick Godwin
    Participant

    I ordered 115 FMJ n Received 115 JHP. My question is I use Titegroup to reload n can I still use it for the 115 grain JHP. If so I use 3.9 to 4.0 powder. Can I still use this load for the 115 grain JHP ?

    February 14, 2022 at 2:14 pm #409798
    James Morris
    Participant

    I would use 4.4 gr. with hollow points. It works.

    July 14, 2022 at 6:32 pm #442355
    johnandterry
    Participant

    Any chronograph #’s for 4.4 gr Titegroup. The highest published amt. I’ve seen is 4.2. It would be nice to see a little higher velocity.

    July 14, 2022 at 6:33 pm #442357
    johnandterry
    Participant

    Never mind, I’m thinking of 124 gr bullets.

    July 10, 2023 at 8:53 am #496385
    1kevinmason
    Participant

    I ordered the 115 grain JHP and using the Silhouette powder, I can not find any load data for them. I am new to loading and i do not want to make a bad mistake being new to it.
    Is there anywhere I can find this data, OAL, Charge Etc.

    July 17, 2023 at 3:16 pm #496598
    cbmay48
    Participant

    https://www.hodgdonreloading.com/reloading-data-center
    I haven’t used Silhouette yet, but I would use the data for the Nosler 115 gr JHP bullet, as it is similar to the RMR bullet. Start low and work up, watching for pressure signs.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.
Scroll to Top