62 grain TAC data

By /

RMR Bullets Home › Forum › General Reloading Discussion › 62 grain TAC data

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 2, 2025 at 11:14 am #528826
    Ted Schrader
    Participant

    I just ordered some of the 62gr bonded bullets and was hoping someone has developed an accurate load with TAC.

    Thanks in advance for any info….

    March 2, 2025 at 11:38 am #528830
    SC
    Participant

    These look to be Speer Gold Dots. I\’ve shot them with faster powders, H322, N133, etc

    Never tried TAC with the 62 Gold Dot, but I have shot the 62 Hornady BTHP with 25.1 grains of TAC. My notes show sub MOA groups out of my 1:7 twist bolt action.

    March 10, 2025 at 8:39 am #529141
    cbmay48
    Participant

    FWIW, I settled on 24.5 gr of TAC with the Hornady 62 gr BTHP as our primary load in our AR-15’s. Has been accurate in twist rate of 7”, 8”, and 9” AR’s. Might be a good starting point for you to see what your rifle prefers. Let us know how it works out.

    April 17, 2025 at 9:51 am #531174
    cbmay48
    Participant

    I just ordered 500 of the 62 gr bonded bullets and will try a few loads in my AR’s with TAC, X-Terminator and maybe another powder or two. Post up results when I am able to do so.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Scroll to Top