Looking for a recipe for 147 Heavy Match Winners & CFE Pistol

By /

RMR Bullets Home › Forum › Reloading Database › Looking for a recipe for 147 Heavy Match Winners & CFE Pistol

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 3, 2021 at 11:54 am #393650
    adamhamm1
    Participant

    I\’m looking for a recipe for 147 Heavy Match Winners & CFE Pistol. Anybody with any experience loading these rounds care to share some info? I\’ve been shooting the 124 MPR\’s for quite some time, but figured I\’d give the MW\’s a try. 124\’s were out of stock (at that time), so I ordered some 147\’s. The plan is, like always, to start low and work my way up. I\’ve been pretty pleased with the CFE Pistol powder, and just looking to see if anyone has used them on the 147 HMW\’s yet. Ordered last week so hopefully they\’ll be showing up soon and I can begin load development. Thanks!

    January 9, 2022 at 7:44 pm #402424
    2alohatactical
    Participant

    Hodgdon says:
    CFE Pistol
    1.10 OAL

    Starting Load: 3.7grs
    Max Load: 4.2grs

    I have CFE Pistol but will probably use Titegroup.

    March 14, 2022 at 7:36 pm #416686
    craigrushton83
    Participant

    On steel challenge loads I go 1.115 and 3.5 cfe when I want to make power factor I bump it up to 3.7 I get 850 on the nose with my 16 inch pcc and 756 FPS out of my Glock 17 with a 3.5 load 3.7 puts me at 950 FPS pcc and 850 out of my Glock

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Scroll to Top