Reload data for 120g JHG Nuke

By /

RMR Bullets Home › Forum › General Reloading Discussion › Reload data for 120g JHG Nuke

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 3, 2025 at 7:14 pm #526373
    Noah Peschel
    Participant

    Good evening, thinking of ordering some of the 9MM, 120g JHP nukes and was wondering if anybody used powder by alliance bull’s-eye. If so, how was your load data and how did it perform? I was going to run a cci 550 small pistol magnum primer.

    January 4, 2025 at 4:01 pm #526460
    SC
    Participant

    Bullseye is a fairly fast burning powder powder to use in 9mm. No need to run a magnum primer but it will work.

    I would follow 124 grain recipes in the Alliant manual. You will probably end up somewhere north of 4 grains.

    January 14, 2025 at 5:29 pm #526805
    Noah Peschel
    Participant

    The only reason I am using Magnum primers because, that’s all I could find. I figured I would just reduce the gain.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Scroll to Top