Forum Replies Created

Viewing 4 posts - 21 through 24 (of 24 total)
  • Author
    Posts
  • in reply to: .224 69 3GH #394479
    Jacob Wilcox
    Keymaster

    My barrel is 1 -8\” Xcalibur. I think my OAL is 2.245. Not sure on the primer. It\’s lake city pull down cases.

    in reply to: Primers are starting to return #394477
    Jacob Wilcox
    Keymaster

    Primes will go back down to reasonable prices again. The biggest reason for high prices is the very short supply. I have a lot of friends in the industry and the biggest issue is they cannot get enough brass to make as many as they usually do. Couple that with an increased demand and you get stupid high prices. There will be tons of primers in stock everywhere as soon as brass is more available. Theres a ton of new companies starting to make them so supply is eventually going to outpace demand.

    in reply to: .224 69 3GH #390623
    Jacob Wilcox
    Keymaster

    The 28\” is my gas gun I built specifically for squirrels.

    in reply to: .224 69 3GH #387253
    Jacob Wilcox
    Keymaster

    Our favorite load here at RMR is 24.6 grains of TAC. From my 28\” barrel I get about 1/2\” groups and 3150 fps. Obviously you won\’t get that velocity from a shorter barrel but we use the same load in our 16\”-18\” barrels with really good accuracy.

Viewing 4 posts - 21 through 24 (of 24 total)
Scroll to Top