We do not sell loaded ammo. Everything on our website is for handloading only. Dismiss

Free U.S. Shipping

OAL for 9mm 124 gr RMR TC bullets

This topic has 7 replies, 7 voices, and was last updated 4 years, 7 months ago by MSwickard.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
December 9, 2021 at 11:28 am #394604
Arkady Ten
Participant
Please share experience
December 10, 2021 at 5:50 am #394955
backcut
Participant
124 matchwinner, 1.085 to pass plunk test in gen5 Glock
December 11, 2021 at 10:42 pm #395355
Arkady Ten
Participant
Thanks!
January 21, 2022 at 7:16 pm #404529
kerry
Participant
My drop test in my second Gen Beretta 92FS was 1.50″ COL. Be mindful that barrel has deep grooves. Many of my others are about 1.10″ COL.
January 23, 2022 at 4:05 pm #404797
Ken Watanabe
Participant
I’ve loaded mine to an an OAL of to 1.095 to 1.10, using mixed brass. All drop in and seat flush in my EGW chamber checker block. They cycle through my Canik TP9 V2, Ruger PCC, CZ-85B, and my 9mm AR build.
February 14, 2022 at 2:12 pm #409792
James Morris
Participant
Find a brand of ammo that never fails then use that length. A lot of people do that including me with no issues. Reloading manuals didn’t use your gun when working up loads.
February 16, 2022 at 12:18 pm #410679
mdi255
Participant
Find the data for a similar size, weight, profile bullet in your manual(s) and start with the book OAL. Plunk test and adjust if necessary… I have 4 9mm pistols one, has a shorter chamber so I reload to fit that gun, Masada9mm, and it works in all…
March 13, 2022 at 11:05 am #416363
MSwickard
Participant
With this bullet, I’m using 1.120″ for my Glock 26, Glock 19 (both Gen 4) and Sig 226 Navy. Max COL is 1.150″. However at this length the guns do not cycle as well.
Author

Posts