Home › Forums › General Reloading Discussion › 62 grain TAC data
- This topic has 3 replies, 3 voices, and was last updated 1 year, 6 months ago by
cbmay48.
-
AuthorPosts
-
March 2, 2025 at 11:14 am #528826
I just ordered some of the 62gr bonded bullets and was hoping someone has developed an accurate load with TAC.
Thanks in advance for any info….
March 2, 2025 at 11:38 am #528830These look to be Speer Gold Dots. I’ve shot them with faster powders, H322, N133, etc
Never tried TAC with the 62 Gold Dot, but I have shot the 62 Hornady BTHP with 25.1 grains of TAC. My notes show sub MOA groups out of my 1:7 twist bolt action.
March 10, 2025 at 8:39 am #529141FWIW, I settled on 24.5 gr of TAC with the Hornady 62 gr BTHP as our primary load in our AR-15’s. Has been accurate in twist rate of 7”, 8”, and 9” AR’s. Might be a good starting point for you to see what your rifle prefers. Let us know how it works out.
April 17, 2025 at 9:51 am #531174I just ordered 500 of the 62 gr bonded bullets and will try a few loads in my AR’s with TAC, X-Terminator and maybe another powder or two. Post up results when I am able to do so.
-
AuthorPosts
- You must be logged in to reply to this topic.