Free U.S. Shipping
(208) 816–3859

Load data for 9mm 124gr RMR FMJ Truncated Cone Flat Point Match Winner Bullets

Home › Forums › Reloading Database › Load data for 9mm 124gr RMR FMJ Truncated Cone Flat Point Match Winner Bullets

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 10, 2026 at 8:50 am #546315
    Victor Cabrera
    Participant

    Need Load data for 9mm 124gr RMR FMJ Truncated Cone Flat Point Match Winner Bullets. Im using Titegroup and CFE Pistol.

    Thanks

    Victot

    July 26, 2026 at 2:32 pm #550466
    Gary Smith
    Participant

    For the 124 TCFP-MW:

    3.9 gr of Titegroup gave 1056 ft/sec from my Tanfoglio Stock Master, 4-7/8″ bbl

    4.0 gr Titegroup gave 1080 ft/sec from a Springfield Range Officer, 5″ bbl

    Cartridge OAL is 1.100 +/- .005″

    August 16, 2026 at 8:50 am #551048
    Larry Tarlton
    Participant

    I have loaded many RMR FP Match Winners. all bullet weights 115, 124, 135, and 147s. Reloading is a passion of mine so is bullseye shooting and I specialize in 9 mm. I have chronograph data for nine different gunpowder’s suited for 9 mm. All of them do at least one thing very well, some of them do many things very well. So here goes my best data and my safest data for 124 grain RMR-FP.
    Silhouette 5.4 (124FP 1.10 OAL 1085 FPS )
    Silhouette 6.0 (124 FP 1.10 OAL 1230 FPS )
    Silhouette 6.2 (124 FP 1.10 OAL 1260 FPS)
    Silhouette consistently adds 15 FPS per one tenth of a grain you can go as low as 4.8 grains and still cycle most slides. I have been higher than 6.2 grains with Silhouette but I will leave that for another time.

    August 24, 2026 at 7:45 am #551249
    brett1955
    Participant

    I use BE-86 for my 9mm. I load 3 of the MW FMJ’s. 115,124,135. @ 5.6gn. ( +- .1)for my best accuracy. 1.100 COL. I don’t use a chronograph I estimate some where 1150-1170 with a 5″ barrel.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.