135gr flat point feeding problems

[David Trabue]

My Glock 34 is not happy with the RMR 135gr FP bullets & won’t feed reliably.

Is longer or shorting COL most likely to contribute to this?

135gr FP over 3.6gr Titegroup at 1.075″ COL.

Suggestions appreciated (other than the obvious – don’t use flat point bullets).

Thanks

[SC]

That seems short to me. I am using a 135 TC (truncated cone) from another brand and the OAL is 1.130. Thousands of them have been used in an HK P30, but I also use the same load in a G19 and a PCC AR which uses Glock mags.

Maybe try 1.100 or 1.120 and see how that works.

[David Trabue]

Thank you!! FWIW, they feed fine in my Glock 19 with OEM barrel. The G34 sports a Wilson barrel, which is a great barrel, but more finicky. Trying the longer length was next on my list. Thanks again!

[Author]

Posts