Free U.S. Shipping

.357 / .38 110 GRAIN Load data 38. SPL

Home Forums Reloading Database .357 / .38 110 GRAIN Load data 38. SPL

Tagged: 

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #503276
    Ben Braun
    Participant

    Hello I am looking for load data and C.O.A.L. for the 38.SPL and the 357 MAG for the.357 / .38 110 GRAIN WINCHESTER KINETIC HE HOLLOW POINT

    #503343
    Geoffrey Stewart
    Participant

    Use Winchester SilverTip .38Spl STANDARD VELOCITY data. The HE is similar to the old SilverTip and is designed to expand to about 45 caliber within the FBI standard 12-18” at standard pressure. It will need the lower end Winchester JHP data for use in .357Mag. It’s a terrific bullet for snubbies, especially the older Detectives, Cobras, and Chiefs Specials.
    HTH

    #503344
    Geoffrey Stewart
    Participant
    #503363
    Ben Braun
    Participant

    That is great to hear because a Sunbie is what I will be using it for.
    I have read the article that you linked but still do not know where i can find the recommended C.O.A.L. for this bullet especially because it is much longer than a standard 110 38 bullet due to the cavity in the back.

    I will use standard pressure loads because of the low velocity this bullet is recommended for but i did not want to seat it to low and have pressure issues.

    does anyone have a 110 silver tip to measure or a HE to measure.

    #506530
    lowdog212
    Participant

    I’m thinking of trying these in a Rossi R92 with a 20 inch barrel. Anyone have any guesses as to how they may perform?

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.