[kerry]

Those loads you have worked up seem fine, what do you think you will gain by increasing the fps by 04-65 fps? Are trying to meet a certain power factor for league shooting?

[kerry]

My drop test in my second Gen Beretta 92FS was 1.50″ COL. Be mindful that barrel has deep grooves. Many of my others are about 1.10″ COL.

[kerry]

Hello,
I dont recommend it but, I have done it.
I have used Small Rifle in place of Small Pistol primes in the past and looks like I will need to do so soon. Do your homework, start low with a hard to ignite powder that can be loaded light, ball powder is best because its harder to ignite then flake powder. I have only done this with Accurate #2 for 9MM loads, 4gn under a 124gn projectile worked great.

[kerry]

Hello,
My go to for the 124gn JHP Multi purpose is Accurate #2 at 4GN, 1.05-1.10 COL for most of my 9mm guns, However I make my Beretta 92FS loads to COL of 1.60 as this Just touches the grooves for the rifling. This is my target League Pistol so that’s why I make the COL so long. Anyway, this is to long for my 3rd Gen Beretta barrel, M9A3, these I make to 1.30 COL due the the grooves being deeper toward the camber.

[Author]

Posts