[Mark]

Thanks for the feedback Keith.

I settled at 1.080 OAL for my initial test loads. This appears to give me about .012 of clearance in my gen 4 Glock barrels.

I’m going to test a few different powder charges and then revisit the length setting before a run any volume or these.

[Mark]

Does anyone have a OAL recommendation for the 9mm 124g MPR bullet?

I’m loading for a Glock 17 and 19 and find at 1.125” OAL the cartridge will not pass the kerplunk test in a factory barrel. Drops fully into my Dillon case gage though.

[Author]

Posts