Free U.S. Shipping
(208) 816–3859

tvarden

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 9, 2021 at 12:11 pm in reply to: Looking for recipe with 124 MPR and true blue. #394647
    tvarden
    Participant

    I looked in every reloading manual I own (lots) and hottest I could find was Lyman 50th 6.0 grs True Blue = 1109 fps

    And Western Powders 6.0 edition lists +P REM GS @ 6.5 grs =1203 fps
    Speer GDHP @ 6.1 grs =1141 fps

    December 9, 2021 at 11:49 am in reply to: Rmr 124 grain hollow poi t multipurpose bulkets #394624
    tvarden
    Participant

    6.2 grains seems hot for 124gr No pressure problem?

    December 9, 2021 at 11:45 am in reply to: Rmr 124 grain hollow poi t multipurpose bulkets #394619
    tvarden
    Participant

    I started with 4.0 grs Titegroup and was getting 1050fps out of a Glock 19 suppressed with Omega 9K. Would heat up fast so after some research I found 4.4 grs Universal gave me 1030fps and did not heat up as fast. So that’s what I’m running now.

    • This reply was modified 3 years, 10 months ago by tvarden. Reason: Work repeated
    December 9, 2021 at 11:12 am in reply to: 9mm 124 MPR #394560
    tvarden
    Participant

    Hum interesting. I’m loaded from Nosler data and load them at 1.120. I just checked one of my Glock 19 barrels and you are correct they fail. However I shoot them from a Glock 19 with a SilencerCo threaded barrel and an Omega 9K can and they pass in that barrel.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)