First off, I have finally run out of my stock of these wonderful bullets. Please Please Please make more!!!!!!!!
3.7 gr Titegroup, COAL 1.112
Shot many of these. My favorite 9mm bullet to load. Very very accurate. Light recoil impulse, keeps accuracy at distance, no brass pressure signs or extraction issues. Used in VP9, VP9SK, CZ75 action
Have you tried any other powders? I have a nice stash of Hodgdon Clays and IMR Target that I’m going to start working up but as you know…data for these 135 fmj’s is pretty much non existing…lol
Use to use clays universal for .45 and 9mm before it became non existent. Ran out of titegroup but lucked out and found some more at the local gun store. I like titegroup because it is well priced, doesn’t foul the gun fast, can get many rounds for range use out of a pound of the stuff, fast burning so good for small case capacity, however, I have used in 357 and 44mag, it has been a good pistol powder for me. The negatives, if you aren’t confident in your equipment you could double charge easily and not notice, not good for loading to max potential of cartridges, pressure can spike rapidly near max loadings.
Western Powders list load data for this bullet on top of Ramshot silhouette with a oal of 1.10. I’m guessing this data will work as a starting point for the RMR 135 gr Nuke V2 JHP RMR bullet. Just curious if anyone has tried it with the JHP.
.
