Free U.S. Shipping
(208) 816–3859

Any insight on crimp amount Montana Silver bullets

Home › Forums › General Reloading Discussion › Any insight on crimp amount Montana Silver bullets

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 6, 2026 at 12:09 am #549771
    Brian
    Participant

      9 and 10mm using Lee factory crimp dies.

      July 8, 2026 at 4:48 pm #549873
      michael.vasquez101496
      Participant

        I use the same die. Do u ever have issues with to tight of a crimp. I noticed the other day It would fail case gauge at .377 bullet would get a line on one side. Would tighten it to .374 and zero issues case gauge. Have not shot just yet to see if it’s makes a difference.

        July 8, 2026 at 5:10 pm #549874
        Brian
        Participant

          I am new to reloading, so I need all the guidance I can get. My Lee die sets are carbide, minus the .357 Sig, but they are early 4 die sets, without the micrometer seating die. I hope those will help with dialing in the zinc clad RM Silver bullets.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.