Free U.S. Shipping
(208) 816–3859

9mm 135gr Match Winners

Home › Forums › Reloading Database › RMR In-House Bullets › 9mm 135gr Match Winners

Tagged: 

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • July 2, 2022 at 6:55 pm #440008
    Mike Jeffries
    Participant

    Looking for some recipes for the 135gr, especially using Bullseye. I do have some Power Pistol and Titegroup, but several pounds of 135gr.

    August 6, 2022 at 3:52 pm #445734
    tkisker
    Participant

    I’m about to load some 135’s with Titegroup. I’ll let you know what I find out if you’re still wondering. I’m thinking 3.6 Gr. at 1.100 OAL will be good though.

    September 4, 2022 at 1:32 pm #450281
    packnruger44
    Participant

    Not sure what kind of load you are looking for but I just started using these for idpa.
    To make 125 power factor I am using Titegroup
    @ 3.4 grains.
    Getting 934fps average in a walther pdp 4”
    Makes a power factor of 127
    Nice soft shooting
    low recoil
    I’m sure you could push them much harder
    If desired

    September 7, 2022 at 12:25 pm #450965
    tkisker
    Participant

    I was able to chrono a batch of these today. I used Titegroup as well.
    Titegroup 3.6 gr.
    1.100 OAL
    985 fps avg
    Power factor approx. 133

    Shot out of a Sig P320 X5 Legion. They shot great. Very accurate. I will probably try a few loads lighter now too though.

    March 28, 2023 at 10:53 pm #484396
    Greg Johns
    Participant

    3.6 gr of TG. 1.10 OAL. 4.6 inch Atlas barrel.
    I used a magneto speed chrono, eight inches off the barrel.
    Ten shot average 933 /PF 126

    Very accurate

    August 16, 2024 at 12:08 pm #518935
    David Trabue
    Participant

    I’m surprised at the FPS/PF difference in the identical loads immediately above.

    .4″ difference in barrel length does not seem like enough to jack up tkisker’s results above that of Greg.

    February 16, 2025 at 7:16 am #528108
    awalker1-6441
    Participant

    The difference in the results is similar to my experience.
    5 1/2” PCC Taccom (barrel has aluminum tube attached to make 16”)
    124 gn RMR RN
    4.1 gn HP38
    Average fps 1131

    Sig X5 Legion 5” barrel
    Same load, chronograph and shot before the PCC
    Average fps 1061

    March 19, 2025 at 2:06 am #529688
    Dan
    Participant

    I just loaded a test batch 135 MW 1.090 OAL. 3.7 Sport Pistol. 938.3 avg. vel. 126.6 pf. Used M&P 5″ Pro for chrono. Ran the gun perfect accuracy great. I did have a hiccup with my Springfield RO. Not the fault of the bullet. recoil spring little on heavy for the light load. Past records show I have been loading that wt. bullet 3.9 gr Sport Pistol, 3.7 Tite Group. 1.09 AOL. will function in All my shooting toys. My “go to” IDPA charge for that weight bullet. (132ish. pf.)

    Dan Glica

    April 4, 2025 at 8:51 am #530374
    Terry Thompson
    Participant

    I have an old “CRONY”, and here are some results of WW 135’s through my G34 Glock (5.25” BBL). I know the results are somewhat different than others.

    1078 fps 5.8 g HS-6
    1036 3.6 g Tight Group
    957 3.2 g ” ”
    956 4.0 g Auto Comp
    1065 4.5 g Auto Comp
    1163 5.2 g Auto Comp
    959 4.0 g CFE Pistol
    1053 4.4 g CFE Pistol

    P.S. the G34 has a 10 # recoil spring, all locked back the slide last round.
    I don’t care what the power factor is.

    April 10, 2025 at 12:41 pm #530736
    sswansonbbg
    Participant

    Has anyone used the 135’s MW with N320 or N340? Recipe?
    Thanks

    April 27, 2025 at 10:54 am #531762
    Rich Gonzalez
    Participant

    I’m loading 3.6g of N320 in a scorpion pistol 1.090 & averaging 1,060fps , & also load 3.9g of N340 in a mac5 k & averaging 1,070fps same oal both loads using 135g match winners feed just fine in both w/can .

    June 3, 2025 at 12:06 pm #533499
    BILL WARE
    Participant

    Hey Guys, Techware here; I haven’t posted in a while but have noticed several threads touting 135s in PDP Steel Frames. So consequently, I am currently in process of loading a batch of RMR 135 MWs over VV N330, and N340 for testing in my 5 inch PDP Steel Frame. Also have a Garmin Xero C1 Chrono, so will also provide data post range days.

    July 16, 2025 at 5:18 pm #535978
    eric wludyka
    Participant

    waiting for some 135gr mw to get here. loading for atlas apollo and cz ts2 orange. using cfe powder. have garmin also will post some charge weights and col for both guns. i will probably start with Terry Tompson cfe charge. just start a bit lower.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.