Description
Manufactured by Vista Outdoor, a conglomerate that owns Federal, Speer, Blazer, CCI, and other companies; this demilled, nickel plated brass came from loaded ammunition and has never been fired. All of the cases have been sorted by headstamp so you will either get all Speer, all Federal, all CCI, or all Blazer. They are essentially brand new cases but may have a dull shine or minor dings and dents from the bullet pulling process. Also, almost all of these have tar sealant in the case mouths. Sometimes there are a few flakes of powder stuck to the tar sealant. When I loades these I just used a mid range powder load so as not to have a hot load because of the powder remnants. Like with all new brass, it is recommended that you resize this brass before loading to ensure that you have consistent tension. This is especially true with pulled brass as sometimes the case mouth can get dinged a little and it may be hard to seat a bullet without sizing. Sizing can be accomplished by removing the decapping pin from your resizing die.
This latest batch that we got in is almost entirely Speer headstamp, although there may be a few others under the VO banner.
NOTE: These must ship UPS ground. The price includes shipping within the lower 48 states. If you are outside of the lower 48 please contact us for additional shipping rates.
george_ochoa88 (verified owner) –
Best part they are primed!! Second best part is FREE SHIPPING check every one with my size gauge they all fit without having to resize the brass awesome!!sure they aren’t as shiny as brand new but in the end a good whipe down, paired these up with 124gr gold dot functioned well no hiccups and there were about 12 extra brass case
Mike Kancel –
Processed 1000 of these. Nickel is traditionally harder to size. These where rougher because there is something on the outside of the cases. Ran them through 8 hours of dry media tumbling and they ran adequately thru my titanium Nitrite 9mm Hornady dies.
Spoke to El Presidenta of RMR about this . He is the best and always has been with customers. Not an ivory tower guy. Used his 124gr 9mm FMJ flat nose (super high quality from RMR) with 5.2 gr of CFE pistol…. works great. After “ounce fired” these cases will go though the aquas cleaning and they will be great!
Always extra bullets and cases to make up for any OOPSess from RMR. Heaven knows I will crunch a case or two, or buggar up a bullet here or there in the loading process.
Keith A Karschner (verified owner) –
These cases were nice, they were beautiful after after I tumbled them in corn cob media. When put thru my progressive press with the primer punch removed of course and I could make sure they were resized. Then and a fresh batch of 115gr MMW bullets. Perfection…oh I forgot to tell you I ordered 1000 x2 and got 1075 primed all usable cases…I’d say that was a good deal